WARNING!
Risk of injury due to improper troubleshooting
Improper troubleshooting can result in serious injuries
and considerable material damage.
–
Always ensure that all repair work is carried out as
per the information and instructions set out in this
manual and in the associated circuit diagrams.
–
Ensure that nobody is in the hazard zone before
commencing troubleshooting.
–
Troubleshooting must only be carried out by per-
sonnel trained and authorized by the owner.
–
Personnel must have read and understood this
operating manual.
–
Personnel must follow the instructions in this
operating manual.
–
Personnel must have the necessary specialist
skills for such troubleshooting.
NOTICE!
Property damage due to improper cleaning
Unsuitable cleaning agents and methods can result in
leaks on the flow sensor, at the seals or connections
and thus in property damage.
–
Always use a cleaning agent with a flash point
above 55 °C.
–
Always check that the cleaning agent is suitable for
cleaning the surfaces that require cleaning.
–
Never use abrasives, solvents or other aggressive
cleaning agents for cleaning.
–
Never clean using a jet of liquid, e.g. pressure
washer.
–
Never scratch off dirt using sharp objects.
2.15 Safety information for replacement parts
WARNING!
Risk of injury due to the use of incorrect replace-
ment parts
Hazards for personnel, as well as damage, malfunc-
tions or a total failure can occur due to the use of incor-
rect or faulty replacement parts.
–
If you have any questions, always contact Baumer.
Improper troubleshooting
Using incorrect replacement parts
Safety and responsibility
Safety information for replacem...
05.03.2020
Flow sensor PF55S
24
