Basler scout GigE, User Manual, Page: 120 / 374

Image Acquisition Control AW00011916000
110 Basler scout GigE
Camera.AcquisitionStart.Execute( );
You can also use the Basler pylon Viewer application to easily set the parameters.
For more information about the pylon Viewer, see Section 3.1 on page 43 .
When the camera's acquisition mode is set to single frame, the maximum possible
acquisition frame rate for a given AOI cannot be achieved. This is true because
the camera performs a complete internal setup cycle for each single frame and
because it cannot be operated with "overlapped" exposure (the scA750-60 does
not allow "overlapped" exposure on principle).
To achieve the maximum possible acquisition frame rate set the camera for the
continuous acquisition mode. And for all models except scA750-60 also use
"overlapped" exposure.
For more information about overlapped exposure, see Section 9.9 on page 153 .