BARTINGTON INSTRUMENTS
Page 19 of 61 OM1800/26
11.1. Main Menu: Grid Mode
The items in the Grid Mode main menu are as follows:
•
Start survey
•
Start scan
•
Output data
•
Delete data
•
Set parameters
•
Adjust gradiometer
•
System reset
The two-line display will show only two items at a time. The first two items in the Grid Mode main
menu will be shown as:
>Start survey
Start scan
The > prompt in the top line shows the menu item that will be activated when the
ENTER
key is
pressed. The second line shows the next item in the list. Scroll down and up through the list,
one line at a time, by pressing the down and up arrow keys. Hence, pressing the down arrow will
change the display to:
>Start scan
Output data
After completing each task the program returns to this main menu.
Note:
Always return to this menu before pressing the
ON/OFF
switch to turn off the power.
Note:
Before selecting
Start survey
or
Start scan
, select
Set parameters
to set the number of
sensors being used and all other variables to ensure correct operation.
Note:
When using the instrument for the first time, if the
Set parameters
menu shows
invalid values or is incomplete, then return to the main menu and select
System reset
. This
sets default values into the operating parameters, deletes the memory and resets the
memory pointers. The parameters can then be set to the values required by the operator.
