Barox Kommunikation RY-LGSP23-10G, User Manual, Page: 88 / 383

barox Kommunikation
Publication date: Sept, 2015
Revision A1
77
is 1.

Action :
Select whether forwarding is permitted ("Permit") or denied ("Deny"). The default value is
"Permit".

Rate Limiter ID :
Select which rate limiter to apply on this port. The allowed values are Disabled or the values
1 through 16. The default value is "Disabled".

Port Redirect :
Select which port frames are redirected on. The allowed values are Disabled or a specific
port number and it can't be set when action is permitted. The default value is "Disabled".

Mirror :
Specify the mirror operation of this port. The allowed values are:
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored.
The default value is "Disabled".

Logging :
Specify the logging operation of this port. The allowed values are:
Enabled: Frames received on the port are stored in the System Log.
Disabled: Frames received on the port are not logged.
The default value is "Disabled". Please note that the System Log memory size and logging
rate is limited.

Shutdown :
Specify the port shut down operation of this port. The allowed values are:
Enabled: If a frame is received on the port, the port will be disabled.
Disabled: Port shut down is disabled.
The default value is "Disabled".

State :
Specify the port state of this port. The allowed values are:
Enabled: To reopen ports by changing the volatile port configuration of the ACL user
module.
Disabled: To close ports by changing the volatile port configuration of the ACL user module.
The default value is "Enabled"

Counter :
Counts the number of frames that match this ACE.

Buttons
Apply – Click to save changes.
Reset - Click to undo any changes made locally and revert to previously saved values.

Upper right icon (Refresh, clear)
You can click them for refresh the ACL Port Configuration or clear them by manual.