Barox Kommunikation RY-LGSP23-10G, User Manual, Page: 336 / 383

barox Kommunikation
Publication date: Sept, 2015
Revision A1
325
DSCP is the DSCP value to be used to provide Diffserv node behavior for the specified
application type as defined in IETF RFC 2474. Contain one of 64 code point values (0
through 63).

Auto-negotiation
Auto-negotiation identifies if MAC/PHY auto-negotiation is supported by the link partner.

Auto-negotiation status
Auto-negotiation status identifies if auto-negotiation is currently enabled at the link
partner. If Auto-negotiation is supported and Auto-negotiation status is disabled, the
802.3 PMD operating mode will be determined the operational MAU type field value rather
than by auto-negotiation.

Auto-negotiation Capabilities
Auto-negotiation Capabilities shows the link partners MAC/PHY capabilities.

Buttons
Auto-refresh: Check this box to refresh the page automatically. Automatic refresh occurs
every 3 seconds.
Refresh: Click to refresh the page.
3-11.3 PoE
This page allows the user to inspect the current status for all PoE ports.The section show all
port Power Over Ethernet Status.
Web Interface
To show LLDP EEE neighbors:
1. Click Monitor ,LLDP, PoE
2. Display Power Over Ethernet Status Information
3. Click Auto-refresh for auto-update web screen
Figure 3-11.3: The LLDP Neighbors EEE information
Parameter description:

Local Port :
The port for this switch on which the LLDP frame was received.

Power Type :