Barox Kommunikation RY-LGSP23-10G, User Manual, Page: 329 / 383

barox Kommunikation
Publication date: Sept, 2015
Revision A1
318
3-10.2.3 IPv6 SFM Information
Entries in the MLD SFM Information Table are shown on this page. The MLD SFM
(Source-Filtered Multicast) Information Table also contains the SSM (Source-Specific Multicast)
information. This table is sorted first by VLAN ID, then by group, and then by Port. Different
source addresses belong to the same group are treated as single entry.
Web Interface
To display the MLDv2 IPv6 SSM Information in the web interface:
1. Click Monitor, MLD Snooping, IPv6 SFM Information.
2. If you want to auto-refresh the information then you need to evoke the “Auto-refresh”.
3. Click “ Refresh“ to refresh a entry of the MLDv2 IPv6 SSM Information.
4. Click “<< or >> “ to move to previous or next entry.
Figure 3-10.2.3: The IPv6 SFM Information
Parameter description:
Navigating the MLD SFM Information Table
Each page shows up to 99 entries from the MLD SFM Information table, default being 20,
selected through the "entries per page" input field. When first visited, the web page will show
the first 20 entries from the beginning of the MLD SFM Information Table.
The "Start from
VLAN
", and "group" input fields allow the user to select the starting point in the
MLD SFM Information Table. Clicking the button will update the displayed table starting from
that or the closest next MLD SFM Information Table match. In addition, the two input fields will
- upon a button click - assume the value of the first displayed entry, allowing for continuous
refresh with the same start address.
The will use the last entry of the currently displayed table as a basis for the next lookup. When
the end is reached the text "No more entries" is shown in the displayed table. Use the button
to start over.
MLD SFM Information Table Columns

VLAN ID :
VLAN ID of the group.

Group :
Group address of the group displayed.

Port :