Home
/
Barox Kommunikation
/
RY-LGSP23-10G
/
User Manual

Barox Kommunikation RY-LGSP23-10G, User Manual, Page: 275 / 383

Share

Page: 275 / 383

Barox Kommunikation RY-LGSP23-10G User Manual Download Page 275

barox

Kommunikation

Publication date: Sept, 2015

Revision A1

264

EAPOL frame for EAPOL-based authentication, and the source MAC address from the most
recently received frame from a new client for MAC-based authentication.



QoS Class :

QoS Class assigned to the port by the RADIUS server if enabled.



Port VLAN ID :

The VLAN ID that NAS has put the port in. The field is blank, if the Port VLAN ID is not
overridden by NAS.

If the VLAN ID is assigned by the RADIUS server, "(RADIUS-assigned)" is appended to the
VLAN ID. Read more about RADIUS-assigned VLANs here.

If the port is moved to the Guest VLAN, "(Guest)" is appended to the VLAN ID. Read more
about Guest VLANs here.



Buttons

Auto-refresh:

Check this box to refresh the page automatically. Automatic refresh occurs

every 3 seconds.

Refresh:

Click to refresh the page.

«
...
273
274
275
276
277
...
»

Summary of Contents for RY-LGSP23-10G
































































































































































































































































































































































































Reviews:

No comments