Barox Kommunikation RY-LGSP23-10G, User Manual, Page: 219 / 383

barox Kommunikation
Publication date: Sept, 2015
Revision A1
208
'Any', the default value is 'Any'
4. SNAP : PID Valid PID(a.k.a ethernet type) can have value within
0x00-0xFFFF or 'Any', default value is 'Any'
5. IPv4 : Protocol IP protocol number: (0-255, TCP or UDP) or 'Any'
Source IP Specific Source IP address in value/mask format or 'Any'. IP
and Mask are in the format x.y.z.w where x, y, z, and w are decimal
numbers between 0 and 255. When Mask is converted to a 32-bit
binary string and read from left to right, all bits following the first zero
must also be zero DSCP Diffserv Code Point value(DSCP): It can be
specific value, range of value or 'Any'. DSCP values are in the range
0-63 including BE, CS1-CS7, EF or AF11-AF43
IP Fragment IPv4 frame fragmented option: yes|no|any
Sport Source TCP/UDP port:(0-65535) or 'Any', specific or port range
applicable for IP protocol UDP/TCP
Dport Destination TCP/UDP port:(0-65535) or 'Any', specific or port
range applicable for IP protocol UDP/TCP
6. IPv6 : Protocol IP protocol number: (0-255, TCP or UDP) or 'Any'
Source IP IPv6 source address: (a.b.c.d) or 'Any', 32 LS bits
DSCP Diffserv Code Point value(DSCP): It can be specific value, range
of value or 'Any'. DSCP values are in the range 0-63 including BE,
CS1-CS7, EF or AF11-AF43
Sport Source TCP/UDP port:(0-65535) or 'Any', specific or port range
applicable for IP protocol UDP/TCP
Dport Destination TCP/UDP port:(0-65535) or 'Any', specific or port
range applicable for IP protocol UDP/TCP

Action Configuration :
Class QoS Class: "class (0-7)", default- basic classification
DP Valid DP Level can be (0-3)", default- basic classification
DSCP Valid dscp value can be (0-63, BE, CS1-CS7, EF or AF11-AF43)

Buttons:
Apply – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved values.