Baroness SP160EB, Owner'S Operating Manual

Page: 28 / 83

Disconnect the output plug of the charger
from the connector on the main vehicle.
Install the water-proof cap onto the
connector on the main vehicle.
3
4
1
2
wc5fp4-001
Charging of Battery_003
1 Connector on main vehicle
2 Output plug
3 Charger
4 Input plug
Shift Lever
Inspection of Shift Lever Fulcrum
The shift lever fulcrum may begin to rattle due
to frequent use and may no longer be able to
perform shift operations correctly.
Make sure that the shift lever fulcrum does
not rattle.
Make sure that there is no wear of the shift
lever fulcrum bolt.
Make sure that the plate of the shift lever
fulcrum is not bent.
1
2
3
4
ekx2f4-001
Inspection of Shift Lever Fulcrum_001
1 Shift lever
2 Shift lever fulcrum
3 Bolt
4 Nut
9.
10.
1.
2.
3.
Tire
Inspection of Tires
Check the pneumatic pressure of the tires.
Make sure that there are no cracks,
damage or abnormal wear.
Tire size Pneumatic pressure
Front wheel (PD21 x
11.00 - 10)
70 kPa (0.7 kgf/cm
2
)
Rear wheel (22 x 11.00
- 8)
40 kPa (0.4 kgf/cm
2
)
Brake
Inspection of Brake
While traveling, depress the brake pedal
firmly to make sure that the brake is applied
effectively.
Inspection of Parking Brake
Important
If the operator leaves the seat without
applying the parking brake in power-on state,
a buzzer will sound. (intermittent tone)
When the parking brake is applied, the buzzer
will stop.
Park the machine on a level surface.
Switch on the machine.
"Procedure to Switch On Machine" (Page
4-16)
Set the transmission shift lever to the
"Neutral" position.
"Shift Lever" (Page 4-26)
Check that the parking brake is applied.
Push the main vehicle back and forth to
check that the brake is applied effectively.
Release the parking brake.
"Brake Pedal" (Page 4-27)
1.
2.
1.
2.
3.
4.
5.
6.
SP160EB
Handling Instructions
Page 4-8
Inspections