Baroness SP160EB, Owner'S Operating Manual

Page: 37 / 83

Turn the key switch to the "ST" position to
switch on the machine.
OFF
ON
ST
1u8zw8-003
Procedure to Switch On Machine_001
Note:
When the machine is switched on, the
buzzer sounds briefly and the red LED lights
up.
FREE
DOWN
UP
LOCK
LV-HV OH-OL TE-EE
ALARM DISPLAY
OS OCR
1
2
1u8zw8-001
Procedure to Switch On Machine_002
1 Red LED
2 Key switch
Slowly turn the key switch back to the "ON"
position.
Procedure to Switch Off Machine
Warning
Make sure that the parking brake is applied
before switching off the machine.
The machine may jerk.
Important
If the operator leaves the seat without
applying the parking brake in power-on state,
a buzzer will sound. (intermittent tone)
When the parking brake is applied, the buzzer
will stop.
Set the traveling pedal to neutral.
4.
5.
1.
Stop the machine on level ground, and then
apply the parking brake.
Raise the rake.
If the blade and cultivator installed, raise
them.
Turn the key switch to the "OFF" position.
Safety Mechanisms
This machine is equipped with a safety function
for switching on the machine.
When switching on the machine, the safety
function prevents the machine from being
switched on unless all of the following three
conditions are met.
An operator is sitting on the seat.
The parking brake is applied.
The traveling pedal is set to the neutral
position.
Warning Mechanisms
This machine features a warning mechanism to
indicate when the operator leaves the seat
without applying the parking brake or when a
malfunction is detected in the travel control
system.
If the operator leaves the seat without
applying the parking brake in power-on state,
a buzzer will sound. (intermittent tone)
When the parking brake is applied, the
buzzer will stop.
If any of the following malfunctions are
detected in the travel control system, a buzzer
will sound. (continuous tone)
LV (low voltage)
HV (high voltage)
OH (overheating)
OL (overload)
TE (transistor error)
EE (encoder error)
OS (overspeed)
Stop the machine, apply the parking brake,
and then turn the key switch to the "OFF"
position.
When the key switch is turned to the "ON"
position after a while, the buzzer will stop.
If the buzzer continues to sound, check
which red LED in the alarm display panel is
lit.
"Alarm Display Panel" (Page 4-30)
2.
3.
4.
5.
･
･
･
1.
*
2.
[1]
[2]
[3]
[4]
[5]
[6]
[7]
*
Handling Instructions
SP160EB
Handling Instructions
Page 4-17
Safety Mechanisms