Baroness SP160EB, Owner'S Operating Manual

Page: 53 / 83

Important
Do not remove the parking brake wire.
Remove only the travel safety device brake
wire from the hook spring.
1
6
2
3
5
4
gay3t1-033
Towing The Machine_002
1 Travel safety device brake wire
2 Cotter pin
3 Washer
4 Hook spring
5 Brake lever
6 Parking brake wire
Attach the hook spring to the transmission
brake lever.
Attach the cotter pin and washer to the
transmission brake lever.
Close the driver platform.
Apply the parking brake.
Switch on the machine.
Raise the rake.
Raise the blade and cultivator if installed.
Switch off the machine.
Remove the wheel stoppers.
Set the shift lever to the "Neutral" position.
Release the parking brake
Warning
While towing, always keep your foot on the
brake pedal and depress the brake pedal at
any time to stop.
Tow the machine slowly.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
Operations
Precautions during Work
Warning
Do not start to move or stop the machine
abruptly.
Warning
It may result in an unexpected accident if the
machine enters a free-run state.
For fear that the travel safety device
malfunctions and the brake is not
automatically applied, immediately depress
the brake pedal to stop the machine when the
buzzer sounds.
When switching off the machine, make sure
that the parking brake is applied.
Caution
Before starting operations, check that the area
where the operations are to be performed is
safe.
Caution
Do not enter or leave a bunker via a steep
slope or extremely uneven ground.
Caution
Before moving the shift lever, make sure to
stop the machine completely on a level
surface.
Important
Set the shift lever to the "Low speed" position
during operations.
Otherwise, the servo driver will malfunction.
Important
Do not back up with the rake, cultivator or
finishing brush lowered.
Handling Instructions
SP160EB
Handling Instructions
Page 4-33
Operations