Baroness SP160EB, Owner'S Operating Manual

Page: 33 / 83

Principal Tightening Torques
Tightening Torque by Model
SP160EB
Tighten the following bolts and nuts at the torque specified in the table.
For thread locking adhesive, apply a middle strength thread locker (ThreeBond 1322 or equivalent
anaerobic adhesives).
Location Code Part name
Tightening torque Thread locking
adhesive N-m kgf-cm lb-in
Chain wheel K0010100202
Bolt, heat-treated
M10-20
29 -38
295.71 -
387.49 256.68 -
336.34
－
Front
whee
l
Front wheel
bracket
K0000100252 Bolt, M10-25 29 -38
295.71 -
387.49 256.68 -
336.34
－
Wheel
bearing
K0000100352 Bolt, M10-35 29 -38
295.71 -
387.49 256.68 -
336.34
－
Wheel K0011120352
Bolt, heat-treated
M12-35P1.5
67 - 85
683.20 -
866.75 593.02 -
752.34
－
Rhombic
flange
unit
K0661204010
Rhombic flange unit
UCFL204L2
－ － －
M6 set screw
Rear
whee
l
Wheel
mounting
base
K0160000042 20 special nut P1.5 147 - 183
1,498.96 -
1,866.05 1,301.10 -
1,619.73
－
Wheel K0011120252
Bolt, heat-treated
M12-25P1.5
67 - 85
683.20 -
866.75 593.02 -
752.34
－
Servomotor K001A080251
Bolt, w/hexagon hole,
M8-25
14 - 19
142.76 -
193.74 123.91 -
168.17
－
Electrolytic
capacitor
K0000050122 Bolt, M5-12 3 30.59 26.55 －
Note:
The maximum allowable tightening torque for the mounting bolt of the electrolytic capacitor is 3.23
N-m.
Handling Instructions
SP160EB
Handling Instructions
Page 4-13
Tightening Torques