Baroness SP160EB, Owner'S Operating Manual

Page: 36 / 83

When used for light finishing, adjust to the
position second from the bottom.
1
2
f5zgea-005
Adjustment of Finishing Brush_002
1 Clutch lever
2 Movable arm
When used for normal finishing, adjust to the
position third from the bottom.
1
2
f5zgea-006
Adjustment of Finishing Brush_003
1 Clutch lever
2 Movable arm
When used for heavy finishing, adjust to the
highest position.
1
2
f5zgea-007
Adjustment of Finishing Brush_004
1 Clutch lever
2 Movable arm
2.
3.
4.
Procedure to Switch On/Off Machine
Procedure to Switch On Machine
Warning
The machine may enter a free-run (neutral)
state for electrical or mechanical reasons.
Depress the brake pedal to stop the machine.
If the machine entered a free-run state for
electrical reasons, the travel safety device
will be activated and the brake will be
automatically applied.
However, depending on the
circumstances, the machine may not be
stopped. In that case, depress the brake
pedal to stop the machine.
These are the cases of free-run state for
electrical reasons.
When the red LEDs in the alarm display
panel light up.
When the buzzer notifies.
When the machine is switched off.
If the machine entered a free-run state for
mechanical reasons, depress the brake
pedal to stop the machine.
This is the case of free-run state for
mechanical reasons.
When the shift lever is set to the
"Neutral" position.
Warning
Before switching on the machine, make sure
that there are no other people or obstacles
around the machine.
Caution
Make sure that the covers are correctly
installed and are not damaged.
Sit on the seat.
Make sure that the parking brake is applied.
Make sure that the traveling pedal is in the
neutral position.
･
1.
2.
3.
･
1.
1.
2.
3.
SP160EB
Handling Instructions
Page 4-16
Procedure to Switch On/Off Machine