Baroness LM66GC, Owner'S Operating Manual, Page: 69 / 85

Removing/Installing The Bed Knife
Removing The Bed Knife
Caution
Both the reel cutter (cutting cylinder) and the
bed knife (bottom blade) are edged tools.
Handle them carefully, since they could cut
your hands and feet.
Caution
Raising the front part of the machine for
servicing operation may create a falling
hazard.
Support the machine securely.
Remove the bed knife base COMP.
Place the bed knife base COMP on a stable
workbench.
Remove the bed knife by loosening the
screw with a hammer driver or punch.
2
3
1
mbl5jl-001
Removing The Bed Knife_001
1 Bed knife base
2 Bed knife
3 Screw
1.
2.
3.
Installing The Bed Knife
Caution
Both the reel cutter (cutting cylinder) and the
bed knife (bottom blade) are edged tools.
Handle them carefully, since they could cut
your hands and feet.
Caution
Raising the front part of the machine for
servicing operation may create a falling
hazard.
Support the machine securely.
Caution
See the list in Tightening torques.
Note that the Baroness product warranty may
not apply to defects caused by incorrect or
overtorque tightening etc.
Important
Be sure not to scratch the bed knife base
surface where the bed knife shall be mounted.
Remove rust and dust.
Important
Replace the old screws with new ones.
Tighten the screws uniformly with a
hammer driver.
2
3
1
4miqko-001
Installing The Bed Knife_001
1 Bed knife base
2 Bed knife
3 Screw
1.
Maintenance
LM56GC
・
LM66GC / LM66TC
Maintenance
Page 5-19
Maintenance (Mower)