Baroness LM66GC, Owner'S Operating Manual, Page: 54 / 85

Maintenance Item
Before Work
After Work
Every 10 hrs. Every 20 hrs. Every 25 hrs. Every 50 hrs.
Every 100 hrs. Every 300 hrs. Every 500 hrs.
Every year
Every 2 years
When Required
Remarks
Main body
Check tire pressures and
condition
○
Refer to "Inspection of
Tires"
Check damaged parts
○
Check tightening bolts and nuts
○
Check main clutch lever
actuation
○
Check brake function ○
Refer to "Inspection of
Brake""Adjustment of
Brake"
Check work lamp illumination
○
Adjust handle position ○
Refer to "Adjustment of
Handle"
Check safety lock of main clutch
○
Check cover condition
○
Clean machine exterior
○
Grease and Lubricate all
moving parts
○ ○
Refer to "Greasing
Points"
Adjust engine clutch spring
○
Refer to "Adjustment of
Engine Clutch"
Check brake wire ○
Refer to "Inspection of
Wire"
Replace as necessary.
Check electrical wiring condition
(Damage, defacement and joint
looseness)
○
Adjust engine clutch gap
○
Refer to "Adjustment of
Engine Clutch"
Check throttle wire ○
Refer to "Inspection of
Wire"
Check main clutch wire
○
Refer to "Inspection of
Wire"
Cutting section
Check blade condition (Reel
cutter and Bedknife)
○
Refer to "Inspection of
Reel Cutter (Cutting
Cylinder) and Bed Knife
(Bottom Blade)"
Check cover condition
○
Check roller condition ○
Check groomer condition ○
Engage blades
○
Refer to "Adjustment of
Blade Engagement"
Check mowing height ○
Refer to "Adjustment of
Cutting Height"
LM56GC
・
LM66GC / LM66TC
Maintenance
Page 5-4
Maintenance Schedule