Baroness LM66GC, Owner'S Operating Manual, Page: 25 / 85

Tighten the bolt, washer, and nut at the left
side of the stand that were temporarily
secured.
Step:4
Step:3
1
4
2 3
y7fthb-002
Installing the Stand_002
1 Stand
2 Bolt
3 Washer
4 Nut
Confirmation of the Operation
Check that the brake operates completely.
Check that the engine clutch operates
completely.
If necessary, make adjustment.
Inspection Before Use
Be sure to perform an inspection before you
start using the machine so that you will be able
to take advantage of its optimum performance
for a long period of time.
Reel Cutter (Cutting Cylinder) and Bed
Knife (Bottom Blade)
Inspection of Reel Cutter (Cutting Cylinder) and
Bed Knife (Bottom Blade)
The reel cutter (cutting cylinder) and bed knife
(bottom blade) may become dull due to
frequent use, objects crushed during mowing,
or damage caused during transportation.
Inspect the reel cutter (cutting cylinder) and
bed knife (bottom blade), and if necessary,
adjust the blade engagement, perform back
lapping, or resharpen or replace the reel
cutter (cutting cylinder) and the bed knife
(bottom blade).
Check to see whether or not the edge of
the reel cutter (cutting cylinder) and the bed
knife (bottom blade) are too blunt to cut.
4.
1.
2.
3.
1.
Make sure that the reel cutter (cutting
cylinder) and the bed knife (bottom blade)
are not cracked.
Check to see how much the reel cutter
(cutting cylinder) and the bed knife (bottom
blade) are worn.
Make sure that the reel cutter (cutting
cylinder) and the bed knife (bottom blade)
have not changed color due to heat from
grinding.
Check to see whether or not the second
edge face (relief) remains at the point of
reel cutter (cutting cylinder).
Make sure that the welding between the
reel cutter (cutting cylinder) and the disc
has not come off.
Cover
Inspection of Covers
Caution
If you have removed the covers during
inspection, be sure to securely install them in
their original positions.
If a cover remains removed, foreign objects
may fly off, possibly resulting in injuries.
Make sure that there is no wear or
deterioration of the reel cover and all other
covers.
Make sure that there is no damage to the
reel cover and all other covers.
Make sure that there is no interference with
moving parts due to deformation of the reel
cover and all other covers.
Make sure that the reel cover and all other
covers are installed in their appropriate
positions.
2.
3.
4.
5.
6.
1.
2.
3.
4.
Handling Instructions
LM56GC
・
LM66GC / LM66TC
Handling Instructions
Page 4-3
Inspection Before Use