Baroness LM66GC, Owner'S Operating Manual, Page: 46 / 85

1 Air adjusting plate
2 Reel cutter (Cutting cylinder)
3 Reel cover
A Close
B Away
Engine Clutch Cover
The engine clutch cover is located on the left
side of the engine and covers the engine
clutch.
Open or close the engine clutch cover by
removing or installing the lock bolt.
1
2
A
B
paspfk-005
Engine Clutch Cover_001
1 Engine clutch cover
2 Lock bolt
A Loosen
B Tighten
Groomer Clutch Lever
Note:
Depending on the specifications, this function
may not be available.
Caution
This lever should be operated while the main
clutch lever is set to the disengaged position,
and adjusted to the position suitable for your
work.
The groomer clutch lever is located on the
upper side of the right frame and has three
positions.
When the lever is set to the "Normal " position,
the groomer rotates in the same direction as
the reel cutter (cutting cylinder).
When the lever is set to the "Reverse "
position, the groomer rotates in the opposite
direction as the reel cutter (cutting cylinder).
When the lever is set to the "Stop" position, the
groomer will not rotate.
A
B
C
1
aqilnf-001
Groomer Clutch Lever_001
1 Groomer clutch lever
A Normal
B Reverse
C Stop
IGCA (Independent Grass Catcher Arm)
Note:
Depending on the specifications, this function
may not be available.
(IGCA can be installed onto the LM18GC/
LM56GC.)
IGCA is located above the mower.
The IGCA is a mechanism that prevents the
mowing attitude of the mower from changing,
even when there is an increase in the volume
of clippings entering the grass catcher.
It eliminates as much as possible the transfer
of rough handle movements causing changes
in the mower's attitude.
Since the mower is stabilized while the lawn is
mowed, even if the handle is treated roughly,
the cutting height does not change from the
start of mowing the green to the end.
Stable lawn mowing work can be performed
regardless of the operator's skill level and
machine proficiency level, enabling all greens
to be mowed at a uniform cutting height.
1
4fx8ud-001
IGCA (Independent Grass Catcher Arm)_001
1 IGCA
LM56GC
・
LM66GC / LM66TC
Handling Instructions
Page 4-24
Operation of Each Section