Baroness LM315GC, Owner'S Operating Manual, Page: 52 / 86

Throttle Lever
The throttle lever is located in the operation
panel and enables you to adjust the engine
rpm.
Move the throttle lever toward the rabbit icon
(high speed) to increase the engine rpm, and
toward the turtle icon (low speed) to reduce the
rpm.
Note:
The factory default engine rpm (maximum) is
set to 3,000 rpm.
( - #30420)
1
A
B
ef6hsk-009
Throttle Lever_001
(#30421 - )
MOW TRAVEL
3
WD
2
WD
1
B
A
ef6hsk-012
Throttle Lever_002
1 Throttle lever
A High speed
B Low speed
Mower Pedal
Caution
Do not keep depressing the mower pedal after
an operation.
It may cause malfunction.
Caution
The reel cutter rotates while holding down the
up switch when the reel rotation switch is set
to the "MOW" (reel rotation) position.
Set the reel rotation switch to the "TRAVEL"
(reel stop) position except during mowing or
backlapping and using reel excess discharge
system.
Important
Even if the reel rotation switch is set to the
"MOW" (reel rotation) position, when the
mower units are raised, the reel cutters
(cutting cylinders) stop rotating.
Important
Operation of the mower pedal cannot raise the
mower units to the highest position.
When traveling, keep pressing the up switch
to raise the mower units to the highest
position.
1
2
6yy3b4-006
Mower Pedal_001
1 Mower pedal
2 Green LED
The mower pedal is located on the left of the
foot area in front of the driver's seat.
Depressing the pedal switches the mower units
between the up and down positions.
LM315GC
Handling Instructions
Page 4-28
Operation of Each Section