Baroness LM315GC, Owner'S Operating Manual, Page: 43 / 86

Adjust the groomer adjuster so that the
groomer screw can contact with the cutting
edge of the groomer.
Place the cutting height gauge set to the
desired height on the ends of the front and
rear rollers.
Adjust the groomer adjuster up and down
so that the right and left sides can be
parallel.
Adjust it at the other side in the same
manner.
Tighten the nuts securely after adjustment.
9
1
5
10
8
6
2
7
3
4
11
3kws2a-009
Adjustment of Groomer_003
1 Cutting height
2 Cutting height gauge
3 Cutting height screw
4 Nut
5 Front roller
6 Rear roller
7 Bed knife (bottom blade)
8 Reel cutter (cutting cylinder)
9 Grooming height
10 Front groomer
11 Groomer screw
3.
[1]
[2]
[3]
[4]
Handling Instructions
LM315GC
Handling Instructions
Page 4-19
Adjustment Before Operating