Baroness LM101, Owner'S Operating Manual, Page: 75 / 88

1 Bed knife base COMP
2 Collar
3 Compression spring
4 Cutter adjustment bolt
Install the bed knife base COMP.
Tighten the left and right cutter adjustment
nuts evenly on both sides so that the cutter
pin mounting holes of the bed knife base
and cam bush are aligned.
4
5
2
3
1
kx7caa-030
Installation of Bed Knife Base_009
1 Cutter adjustment bolt
2 Cutter adjustment nut
3 Washer
4 Cam bush
5 Bed knife base
Important
Make sure that the cam bush does not move
from the marked position.
Install the lock nut to each (left and right)
cutter pin.
Tighten the cutter pin into the cutter pin
mounting holes of the bed knife base and
cam bush, and then tighten the lock nut to
fix it.
3
1
1
2
2
5ttm1g-009
Installation of Bed Knife Base_010
9.
10.
11.
12.
1 Lock nut
2 Cutter pin
3 Cam bush
Install the rear roller Assy.
1
2
2
5ttm1g-008
Installation of Bed Knife Base_011
1 Rear roller Assy
2 Bolt
Adjust the cutting height.
Install the reel cover and then tighten the
bolts to fix it.
1
1
2
kx7caa-016
Installation of Bed Knife Base_012
1 Bolt
2 Reel cover
13.
14.
15.
Maintenance
LM101
Maintenance
Page 5-23
Maintenance Work