Baroness LM101, Owner'S Operating Manual, Page: 66 / 88

Have a lapping machine or the lapping
handle ready.
Caution
When handling the reel cutter (cutting
cylinder) and the bed knife (bottom blade),
wear gloves to protect your hands.
Pay attention not to let the reel cutter (cutting
cylinder) catch your gloves. Otherwise, you
may injure your hand or fingers.
Important
Check the sharpness of the blade by checking
the blade engagement after cutting grass.
Stop the engine.
Shift the the FOC (High/Low Clip) selector
lever to the "Stop" position.
A
B
C
1
zhz6po-009
Back Lapping_002
1 FOC (High/Low clip) Selector Lever
A High clip
B Low clip
C Stop
2.
3.
4.
Insert one or two strips of newspaper into the
space between the reel cutter (cutting
cylinder) and the bed knife (bottom blade) at
an angle of 90 degrees. Then, rotate the reel
cutter (cutting cylinder) counter-clockwise
(when you face the mower frame from the
left) by hand to check the sharpness of the
blades.
1
A
2
zhz6po-005
Back Lapping_003
1 Reel cutter
2 Bed knife
A Rotation direction
Check the sharpness of the entire range
(three or four points) of the reel cutter
(cutting cylinder).
Using a piece of chalk, mark locations on the
blade that are sharp.
Check the location of the lapping bolt.
1
zhz6po-011
Back Lapping_004
1 Lapping bolt
5.
6.
7.
8.
LM101
Maintenance
Page 5-14
Maintenance Work