Baroness LM101, Owner'S Operating Manual, Page: 73 / 88

Installation of Bed Knife Base
Caution
Both the reel cutter (cutting cylinder) and the
bed knife (bottom blade) are edged tools.
Handle them carefully, since they could cut
your hands and feet.
Caution
When handling the reel cutter (cutting
cylinder) or bed knife (bottom blade), wear
gloves to protect your hands.
Pay attention not to let the reel cutter (cutting
cylinder) catch your gloves. Otherwise, you
may injure your hand or fingers.
Caution
While operations are performed with the front
of the machine raised, it may fall.
Securely support the machine.
Important
Make sure that there is no binding at the cam
bushes in the mower frame.
Important
Install the bed knife base COMP parallel to
the mower frame.
During installation, be careful not to twist both
arms.
Remove the collar and compression spring
from each (left and right) cutter adjustment
bolt, and then temporarily install the bed
knife base COMP onto the mower frame.
3
4
2
1
5
kx7caa-027
Installation of Bed Knife Base_001
1.
1 Collar
2 Compression spring
3 Cutter adjustment bolt
4 Bed knife base COMP
5 Mower frame
Temporarily install the left and right cutter
pins.
Note:
At this time, tighten the lock nuts to the
heads of the cutter pins, but do not allow
the lock nuts to contact the cam bushes.
3
1
1
2
2
5ttm1g-009
Installation of Bed Knife Base_002
1 Lock nut
2 Cutter pin
3 Cam bush
Align the punch mark on each (left and
right) cam bush with the traveling direction.
1
A
kx7caa-028
Installation of Bed Knife Base_003
1 Punch mark
A Traveling direction
2.
3.
Maintenance
LM101
Maintenance
Page 5-21
Maintenance Work