Baroness GM2810, Service Manual

Page: 74 / 185

Caution
Before starting pressure measurement, make
sure that there are no people around the
machine and that there are no objects under
the mower units.
Move the machine onto a level surface,
apply the parking brake, and then stop the
engine.
Secure the rotary knife of the mower unit to
be measured with the knife stopper.
1
2
3
4
5
hlnjwg-002
Rotary Knife Rotation Motor Circuit_002
1 Knife stopper
2 Wing bolt
3 Bolt, w/hexagon hole
4 Nut
5 Spring washer
Install the knife stopper onto the cutting
height adjusting holes at the front of #1
mower unit.
1
hlnjwg-003
Rotary Knife Rotation Motor Circuit_003
1 Cutting height adjusting hole
1.
2.
3.
Loosen the wing bolts of the knife stopper,
insert it onto the rotary knife, and then
tighten the wing bolts in the cutting height
adjusting holes.
1
2
3
hlnjwg-004
Rotary Knife Rotation Motor Circuit_004
1 Knife stopper
2 Wing bolt
3 Rotary knife
Adjust the knife stopper with the four bolts w/
hexagon holes so that the stopper is level
with the ground when #1 mower unit is
lowered, and then secure the stopper with
the nuts.
1
2
3
3
hlnjwg-005
Rotary Knife Rotation Motor Circuit_005
1 Knife stopper
2 Bolt, w/hexagon hole
3 Nut
4.
5.
GM2810
Hydraulic system
Page 4-46
Measurement