Baroness GM2810, Service Manual

Page: 61 / 185

Items to Prepare for Measurement
Prepare a pressure gauge for high pressure
measurements, high pressure hose, and O-
ring connector PF1/4PF1/4.
1 2
3
g5t8is-035
Forward_005
1
Pressure gauge for high pressure
measurements
2 High pressure hose
3 O-ring connector PF1/4PF1/4
Reverse
Caution
Before starting pressure measurement, make
sure that there are no people around the
machine.
Remove the plug of the reverse side
measurement point of the 2WD/4WD
changeover valve located in the center
upper area of the pivot of the main unit.
1
2
7edlvx-034
Reverse_001
1 2WD/4WD changeover valve
2 Plug
6.
1.
Attach the O-ring connector to the reverse
side measuring port.
1
7edlvx-035
Reverse_002
1 O-ring connector (1096-6)
Attach the pressure gauge for high
pressure measurements onto the O-ring
connector of the reverse side measuring
port.
2
1
7edlvx-036
Reverse_003
1
Reverse side measuring port
connector
2
Pressure gauge for high pressure
measurements
2.
3.
Hydraulic system
GM2810
Hydraulic system
Page 4-33
Measurement