Baroness GM2810, Service Manual

Page: 137 / 185

Mower Units #2/#3
Remove the clip pin installed on the
mower arm, and then pull out the grip pin.
1
3
2
wsbhzf-001
Mower Units #2/#3_001
1 Mower arm
2 Clip pin
3 Grip pin
Pull out the mower unit.
1
wsbhzf-002
Mower Units #2/#3_002
1 Mower unit
Install the grip pin and clip pin in the
mounting hole for maintenance.
2
1
wsbhzf-003
Mower Units #2/#3_003
1 Grip pin
2 Clip pin
￭
1.
2.
3.
Start the engine, and then raise the mower
units.
Stop the engine, and then remove the key.
Lift the mower unit at the front.
1
x9s1w3-005
Mower Units #2/#3_004
1 Mower unit
Remove the cotter pin and hardened
roundhead pin inserted at a, and then
insert them at b.
1
2
a
b
c
ahk5df-002
Mower Units #2/#3_005
1 Cotter pin
2 Hardened roundhead pin
Follow the steps below to remove the
rotary knife.
Use the square pipe from the included
tools to secure the rotary knife so that it
does not turn.
Remove the two bolts, spring washers
and washers used to install the rotary
knife.
Remove the knife guide.
4.
5.
6.
7.
8.
[1]
[2]
[3]
Operating Machine and Mower Units
GM2810
Operating Machine and Mower Units
Page 7-19
Inspection and repair of each section