Barnett Engineering B1277, Installation & Operation Manual, Page: 6 / 50

PAGE 2 BEFORE YOU BEGIN
2. BEFORE YOU BEGIN
The Cv3 is an alarm reporting unit with an embedded CDMA transceiver.
Included with this device are the following:
•
16 pin terminal block for wiring alarm inputs
•
16 pin terminal block for wiring alarm outputs/radio/power
•
USB cable for PC programming
•
Dipole Antenna
•
Programming software CD-ROM
•
SMA to TNC Antenna Adapter
•
This manual
System Requirements
The Cv3 is designed to operate on a CDMA network. In order to operate
on a wireless network, you will require an account with a local wireless
provider as well as a Mobile Identification Number (MIN) or Mobile
Directory Number (MDN).
Additionally, to program the Cv3 and the embedded transceiver, one of the
following is required:
•
Standard telephone set with DTMF keypad, or
•
Personal Computer with CD Drive and USB port running
Windows 2000/XP/7/Vista
Registering the Cellular Transceiver
To program the embedded cellular transceiver for use on the CDMA
network, you will need to obtain a MIN (or MDN) from your wireless
provider. You will need to give your wireless provider the following
information:
•
Electronic Serial Number (ESN) – printed on the side of the Cv3
•
Installed “home” location – establishes the local calling region
•
A billing contact name and address
ESN (11 digits)
___________________________
MIN (10 digits)
___________________________
MDN* (10 digits)
___________________________
*may be required