Barnett Engineering B1277, Installation & Operation Manual, Page: 20 / 50

PAGE 16 PROGRAMMING
Input Configuration
Cv3: "Program Input"
Cv3: "Enter Input Number"
You:
Select Input 1
• • •
Select Input 12
Exit to Main Menu
Select Next Input
Cv3: "Input N Sensor is . . ."
You:
1, Digital input
2, Watchdog input
3, Interval input
4, Totalizer input
5, Accumulator input
6, Intrusion input
7, 5 volt analog input
8, 30 volt analog input
9, Current input
10, System – Acknowledge input
11, System – Shift select input
Exit to Main Menu
Next setting for this input
Menu items for Digital Inputs are:
Cv3: "Input N Is . . ."
You:
Enter new value
0 = disabled
1 = enabled
1 to 6 = new group member
Exit to Main Menu
Next setting
Cv3: "Input Level is . . ."
You:
Enter new value
1 = normally high or transition to low
2 = normally low or transition to high
3 = either transition
Exit to Main Menu
Next setting