Barnett Engineering B1277, Installation & Operation Manual, Page: 22 / 50

PAGE 18 PROGRAMMING
0 = disabled
1 = enabled
1 to 6 = new group member
Exit to Main Menu
Next setting
Cv3: "Input Level is . . ."
You:
Enter new value
1 = normally high or transition to low
2 = normally low or transition to high
3 = either transition
Exit to Main Menu
Next setting
Cv3: "Time Scale is . . ."
You:
Enter new value
1 = seconds
2 = minutes
Exit to Main Menu
Next setting
Menu items for Totalizer Inputs are:
Cv3: "Input N Is. . ."
You:
Enter new value
0 = disabled
1 = enabled
1 to 6 = new group member
Exit to Main Menu
Next setting
Cv3: "Input Level is . . ."
You:
Enter new value
1 = normally high or transition to low
2 = normally low or transition to high
3 = either transition
Exit to Main Menu
Next setting
Cv3: "Input Scale is . . ."
You:
Enter new value
0 = xxxxx. (speaks five point zero)
1 = xxxx.y (speaks four point one)
2 = xxx.yy (speaks three point two)