Barnett Engineering B1277, Installation & Operation Manual, Page: 23 / 50

PROGRAMMING PAGE 19
3 = xx.yyy (speaks two point three)
4 = x.yyyy (speaks one point four)
Exit to Main Menu
Next setting
Cv3: "DTMF OFF Code is . . ."
You:
Enter new reset code
Exit to Main Menu
Next setting
Menu items for Watchdog Inputs are:
Cv3: "Input N Is . . ."
You:
Enter new value
0 = disabled
1 = enabled
1 to 6 = new group member
Exit to Main Menu
Next setting
Cv3: "Input Level is . . ."
You:
Enter new value
1 = normally high or transition to low
2 = normally low or transition to high
3 = either transition
Exit to Main Menu
Next setting
Cv3: "Timeout Scale is . . ."
You:
Enter new value
1 = normally seconds
2 = normally minutes
3 = either transition
Exit to Main Menu
Next setting
Cv3: "Timeout Interval is . . ."
You:
Enter new value
1 to 65535
Exit to Main Menu
Next setting