Barnett Engineering B1277 Installation & Operation Manual Download Page 49 | Manualshive

Page: 49 / 50

Barnett Engineering B1277 Installation & Operation Manual Download Page 49

PRODUCT SUPPORT

PAGE 45

11. PRODUCT SUPPORT

Thank you for choosing the ProTalk Cv3 from Barnett Engineering Ltd.

Technical Support

Technical Support for your ProTalk Cv3 is available as follows:

Network & Billing Support
If you have any questions related to network connectivity or your wireless
account, please contact your local service representative.

Product Support
For questions related to activation, performance, service, repair or other
technical or product support concerns, please contact Barnett Engineering
Ltd. At 1-800-268-2646 or email [email protected]

Product Repairs

For all your repair needs, please contact Barnett Engineering Ltd.

Barnett Engineering Ltd. commits to a ‘Repair Turnaround Time’ of thirty
(30) business days on all units under warranty. Repair Turnaround Time is
defined as the time elapsed from the day the defective product arrives at
Barnett Engineering Ltd. facility located in Calgary, Alberta to the day the
repaired product is returned and received by you.

For non-warranty units, please call Barnett Engineering Ltd. and ask for a
repair estimate.

An RMA form is available in the Support section of our website. Please
complete this prior to shipping your unit.

Shipping

Customers are responsible for all shipping costs, to and from Barnett
Engineering Ltd.

«
...
47
48
49
50
»

Summary of Contents for B1277



















































Reviews:

No comments