Barnett Engineering B1277, Installation & Operation Manual, Page: 27 / 50

PROGRAMMING PAGE 23
Exit to Main Menu
Next setting
Cv3: "DTMF On Code is . . ."
You:
Enter new code
Erase On Code
Exit to Main Menu
Next setting
Cv3: "DTMF Off Code is . . ."
You:
Enter new code
Erase Off Code
Exit to Main Menu
Next setting
Cv3: "Output Scale is . . ."
You:
Enter new value
1 = seconds
2 = minutes
Exit to I/O Configurations
Next Setting
Cv3: "Output Time is . . ."
You:
Enter new value
1 to 65535
Exit to Main Menu
Next Setting
Menu items for Automatic On/Off Outputs (Relays 1,2, or 4) are:
Cv3: "Output One Type is Module Control"
Cv3: "Format is . . ."
You:
Enter a new value
0 = NO contacts
1 = NC contacts
Exit to Main Menu
Next setting
Menu items for the Automatic Timed Output (Relay 3 only) are:
Cv3: Output Three Type is Module Control"
Cv3: "Format is . . ."