BARIGO E7/E7S
36
Note
When time measurement by the stopwatch was
stopped/paused after the
S2
button was pressed, the
stopwatch mode is automatically exited if no button is
pressed for approx. one minute. If you return to stop-
watch mode again, the previously measured times will be
retained. Press the
S2
button to resume measurement
from this point.
The stopwatch continues timing in the background if you
decide to leave stopwatch mode to move into a different
mode while time measurement is still active.
The watch stops timing after 99 hours, 59 minutes and
59 seconds.
The watch can save up to 50 laps (LAPS). If, after the
50th lap, you try to save a new lap, the message "LAP
FULL" will appear on the display which informs you that
the lap memory is full.
