barigo E7S Operating Instructions Manual Download Page 27

Page: 27 / 124

BARIGO

–

Makes

the

Difference

Your BARIGO E7/E7S automatically quits setting mode if no button
is pressed for around one minute.

3.4

Setting a second time zone (T2)

Setting, step by step guide:

1. Keep the

button pressed down in Normal mode.

2. Use

to scroll to the SETTINGS menu item (Set-

tings) until it is shown in reverse in the middle of the dis-
play.

3. To make a selection, press the

button.

4. Use

to scroll to the sub-menu item DUAL-TIME

(second time entry) and press the

button.

5. The hour flashes in the middle row of the display. Each

time you press

will increase the hour by 1. Each time

you press

will reduce the hour by 1. To move through

the hours more quickly, keep the

buttons pressed

down. Confirm the hour selection by pressing the

but-

ton.

Summary of Contents for E7S





























































































































Search results

Summary of Contents for E7S

Reviews:

Related manuals for E7S

Brands by name

Popular brands

barigo E7S, Operating Instructions Manual

Search results

Summary of Contents for E7S

Reviews:

Related manuals for E7S

Brands by name

Popular brands