barigo E7S Operating Instructions Manual Download Page 30

Page: 30 / 124

BARIGO E7/E7S

Setting: a step by step guide:

1. Keep the

button pressed down in normal mode.

2. Use

to scroll to the ALARM menu item until it is

shown in reverse in the middle of the display unless it is not
already displayed.

3. To make a selection, press the

button.

4. Use

to scroll to the option (Alarm 1/2/3 or chime)

you want to set.

For setting the chime, continue from Step 12.

6. Keep the

button pressed down until the hours in the

middle row of the display flash.

7. Each time you press

the hour will increase by 1. Each

time you press

the hour will decrease by 1. To move

through the hours more quickly, keep the

buttons

pressed down.

8. Press the

button to set the minutes, as described for the

hours (see above).

9. Next, confirm the alarm you set with the

button.

Summary of Contents for E7S





























































































































Search results

Summary of Contents for E7S

Reviews:

Related manuals for E7S

Brands by name

Popular brands

barigo E7S, Operating Instructions Manual

Search results

Summary of Contents for E7S

Reviews:

Related manuals for E7S

Brands by name

Popular brands