barigo E7S Operating Instructions Manual Download Page 54

Page: 54 / 124

BARIGO E7/E7S



To get a more accurate weather forecast, we recommend

you stay in the same location for at least six hours.



Increasing your altitude normally brings about a change in

the atmospheric pressure. This also has a greater effect on
the weather icon display.



If necessary, the weather icon can be adjusted to the actu-

al weather at your measuring location. In Normal mode
(watch mode), keep the

button pressed until the selec-

tion menu appears. Press the

buttons to select

the SETTINGS title. Confirm by pressing the

button.

Next, select ALTI-BARO and confirm your entry by press-
ing the

button.

Next, press the

button twice to go to the setting display

for the weather icon.

WEATHER (Weather) appears in the top row with a flash-
ing weather icon above it. You can now use the

Summary of Contents for E7S





























































































































Search results

Summary of Contents for E7S

Reviews:

Related manuals for E7S

Brands by name

Popular brands

barigo E7S, Operating Instructions Manual

Search results

Summary of Contents for E7S

Reviews:

Related manuals for E7S

Brands by name

Popular brands