barigo E7S Operating Instructions Manual Download Page 26

Page: 26 / 124

BARIGO E7/E7S

you press

will reduce the hour by 1. To move through

the hours more quickly, keep the

buttons pressed

down.

6. Press the

button again to set the following functions in

this order as described for the hours (see above): Minutes,
seconds, year, month, day and keytone ON/OFF.

7. After selecting the keytone function, pressing the

button

will take you back automatically to the submenu for the set-
tings (SETTINGS).

8. Press the

button

twice

to return to Normal mode (watch

mode) or press the

and

buttons to make additional

settings.

Note



While making settings, you can scroll back a display at
any time by pressing the

button.



When setting the seconds, pressing the

button

to set the seconds to "00" which will start counting right
away.



The time and date format are set in the submenu item
UNITS (see page 100).

Summary of Contents for E7S





























































































































Search results

Summary of Contents for E7S

Reviews:

barigo E7S, Operating Instructions Manual, Page: 26 / 124

Search results

Summary of Contents for E7S

Reviews: