5
MIXING BLADE AND KNEADING BLADE ASSEMBLY fig.4
•
1. Fix the sealing ring on the blade unit.
•
2. Place the blade on the location provided on the base of the jar. Make sure the base of the blade aligns with opening provided, fig.4.
•
3. Turn the jar over while holding the blade gently so that it does not fall.
•
4. Then place the fixing support correctly on the underside of the bowl and turn it clockwise to secure the blade, fig.5.
• To remove the blade from its location :
•
1. Turn the jar over and turn the fixing support counterclockwise
• 2. Then remove the blade carefully. Make sure it does not fall suddenly. It may damage it.
• NOTE:
• •Use a cloth to cover the blades before handling to avoid injury.
• •If the blade is not properly attached, food or liquids during cooking may splash.
• •The kneading blade is designed to knead, mix and mix foods without cutting them.
•
•Do not use the kneading blade for speeds above 3 as the bowl may vibrate and present a risk.
•
•The distance between the kneading blade and the bowl wall is 1 cm, which could cause food to get stuck. If this happens, the unit’s motor will
stop working and go into self-protection mode. Use the spatula to mix and remove stuck food so that the appliance can resume cooking.
MEASURING CUP ASSEMBLY FIG.6
• The measuring cup is used as the product’s lid to prevent splashing and heat loss and is used to measure food quantity. Its maximum capacity is
100 ml.
•
1. Place the measuring cup on the jar lid, fig.7.
• 2. Turn it clockwise to lock it and anticlockwise to open it and take it out.
fig.3
fig.4
fig.5
fig.6
fig.7