9
• All detachable parts are dishwasher safe, except the stainless steel jar that you need to wash manually or with the automatic cleaning program.
Clean the food processor after each use.
• Wash the removable cooking pot with warm soapy water. Rinse and dry thoroughly.
• Wipe the main body with a clean damp cloth. If food residue remains, dampen the cloth in warm soapy water before wiping it. Never submerge
the main body in water or other liquid.
• In order to maintain the good performance of your appliance, check and clean the removable bottom part of the jar after each use.
• Wipe it with a soft damp cloth and dry it thoroughly before using it again.
• If the appliance is not going to be used for a long time, unplug it from the power supply and store it in a cool and safe place.
WARNING:
• Be careful when using the jar and do not in any circumstance put water in the area underneath the jar where the electrical contacts are located.
TROUBLESHOOTING
• The display on the screen of the following error codes is normal. If the problem persists after you have made the solution listed below, contact
Dellonda.
WIFI CONNECTION STEPS
•
1. Download APP “Tuyasmart”
Error
code
Description
Possible cause
Solution
E01
Safety switch not closed
Jar or jar lid is not fixed properly
Reassemble the jar and jar lid,
make sure all the parts are
assembled properly and tightly
E02
Temperature sensor is missing
The jar is not in place, or connection of
the temperature sensor at the jar base is
damaged
Reassemble the jar and make
sure it is fixed properly and
tightly
E03
Motor blocked
Jar overloaded
Decrease the volume of the
food in the jar, or cut the food
to smaller pieces and re-start
the machine
E04
Too high a temperature
No food in the jar, or very little food with high
temperature setting for too long a time
Add food into the jar
E05
Motor temperature too high
Machine works at high loading
for too long a time.
Motor designed to cut out≥90℃
Stop and let motor cool before
restarting
E07
Speed transfer failure
Speed changing between low level (1-5) and
high level (6-10) blocked
Speed transfer failure
Stop machine and restart
E08
Motor NTC (negative
temperature coefficient) failure
When starting speed program, the motor NTC
is not detected.
Stop machine and restart
E11
Cannot use pulse or speed over
level 4, use high speed and high
temperature at the same time
The temperature in the jar is over 90℃, use
level 4 at the same time
Cool down the food to below
90℃ and try pulse again, or use
a speed lower than 4
E12
Weight overload
Weight is heavier than 5kg
2. Open App, select “+” on the upper right corner,
select “Kitchen Appliances”, then “Cooker”, input
Wifi account and password.