background image

 2

Important Information

Please read these instructions carefully and note any safe operational requirements, warnings & cautions. Use the product correctly and with 

care for the purpose for which it is intended. Failure to do so may cause damage and/or personal injury and will invalidate the warranty. Keep 

these instructions safe for future use.

Refer to 

instruction 

manual

Warning:

Hot

Surface

SAFETY INSTRUCTIONS

•  ELECTRICAL SAFETY

•  WARNING! 

It is the user’s responsibility to check the following:

•  Check all electrical equipment and appliances to ensure that they are safe before using. Inspect power supply leads, plugs and all electrical 

connections for wear and damage. Baridi recommend that an RCD (Residual Current Device) is used with all electrical products. You may obtain 

an RCD by contacting your local domestic stockist. If the product is used in the course of business duties, it must be maintained in a safe 

condition and routinely PAT (Portable Appliance Test) tested.

•  Electrical safety information:

  It is important that the following information is read and understood.

•  Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply. 

•  Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that they are secure.

• 

Important: 

Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is fitted with the co

rrect fuse - see 

fuse rating in these instructions.

• 

DO NOT

 pull or carry the appliance by the power cable.

•  DO NOT 

pull the plug from the socket by the cable. 

• 

DO NOT

 use worn or damaged cables, plugs or connectors. 

• 

Ensure that any faulty item is repaired or replaced immediately by a qualified electrician.

• 

This product is fitted with a BS1363/A 3 pin plug. If the cable or plug is damaged 

    during use, switch off the electricity supply and remove from use. Ensure that repairs are   

    carried out by a qualified electrician.

• 

Replace a damaged plug with a BS1363/A 3 pin plug. If in doubt contact a qualified electrician.

 

 

A) Connect the GREEN/YELLOW earth wire to the earth terminal ‘E’.

 

B) Connect the BROWN live wire to the live terminal ‘L’.

 

C) Connect the BLUE neutral wire to the neutral terminal ‘N’.

•  Ensure that the cable outer sheath extends inside the cable restraint and that the restraint is tight. 

• 

Dellonda recommend that installation and repairs are carried out by a qualified electrician.

•  GENERAL SAFETY INSTRUCTIONS

•  Inspect the appliance for visible signs of damage before use. Do not use a damaged device.

•  This appliance is intended for private and non- commercial use. Any use other than previously stated is considered as improper use.

•  No claims of any kind will be accepted for damage resulting from use of the appliance for other than its intended purpose. The risk must be

•  borne solely by the user.

•  This appliance is intended to be used in household and similar applications such as:

• 

–staff kitchen areas in shops, offices and other working environments;

•  –farm houses

• 

–by clients in hotels, motels and other residential type environments;

•  –bed and breakfast type environments.

•  This appliance complies with the standards in force for this type of product.

•  Place the product on a stable surface. 

•  Always connect the appliance to an accessible power outlet.

• 

When unplugging the power cord, always pull it at the plug; do not pull on the cord.

•  Do not run the appliance with an empty jug.

•  Do not use the appliance without the lid being securely clipped in place.

•  Do not move the appliance whilst in use.

• 

Always make sure there is sufficient ventilation around the appliance when it’s in use.

•  The jug body becomes hot during use, always use the handle provided.

•  Do not use the appliance outdoors.

•  Do not use the appliance :

•  –if the plug or the power cord are damaged

•  –if the appliance is in anyway damaged

•  –if it has been knocked

•  Do not let the power cord hang over the edge of a table or the work surface and make sure it does not come into contact with hot surfaces.

•  Do not place and do not use this product near by any heat source (hob, heating, etc.).

•  Avoid wrapping the cord around the appliance and do not bend it.

•  Use only the accessories supplied with the appliance.

•  Never immerse the appliance, its power cord or its plug in water or any other liquid.

•  Do not handle the cord or appliance with wet hands.

•   Unplug the unit when it is not in use.

• 

If the product is damaged, it must be repaired by the manufacturer or by a third person with similar qualification, in order to avoid all

• 

risks. This particularly applies to replacing a damaged connection cable. Unqualified repairs can lead to considerable danger for the user.

Replacement fuse rating:

13A

Summary of Contents for DH163

















Reviews: