barfield DPS1000, User Instruction Manual, Page: 95 / 106

56-101-01175 Revision P
Page | 82
6. The Test Set will change the Cabin Pressure Mode to
“Enabled” (refer to Figure 75).
Figure 75 Enabled Cabin Pressure Mode
7. The Test Set is now ready to be used in the Cabin Pressure Mode. To access the
mode, restart the Test Set.
B. Using Cabin Pressure Mode
1. Turn the Test Set ON.
2. Allow the initialization to complete.
3. The Test Set will then
prompt you to answer “Yes” or “No” to the message below (refer
to Figure 76).
Figure 76 Initialization Screen
4. Select
“No” and the unit will continue with normal operation (no cabin pressure mode).
Select
“Yes” to use the unit in Cabin Pressure Mode.