56-101-01175 Revision P Page | vii
REVISION RECORD
(
Continued on next page…)
REV.
ECO #
REV. DATE
DESCRIPTION OF CHANGE
A
N/A
May 28, 2014
Initial Release.
B
260-01041
October 15, 2014
Update Barfield logo and warranty.
C
260-01092
March 18, 2015
Completely Revised.
D
260-01118
August 11, 2015
TOC Page vii, Chapter #s Pages 54 & 55.
E
260-01135
October 29, 2015
Update navigation screens and introduce OPT-
A.
F
260-01175
October 17, 2016
Updated Format & Logo, Updated Approved
Repair Facility Information, added new
software upload procedure from latest released
app. Added Cabin Pressure Mode. Added IBF
Mode.
G
260-01184
November 7, 2016
Updated with software six month note
reminder.
H
260-01200
May 12, 2017
Updated page numbers, format and “custom
limit” deletion note.
I
260-01213
October 10, 2017
TOC reformatted. Operating limits modified.
Software Update procedure modified.
J
260-01217
May 11, 2018
TOC reformatted; Minor grammatical and
formatting revisions; Addition of CE Mark Page,
Introduction information (Recertification & Test
Set Equivalent), Figure 1, Table 3 (Conformity),
Recertification (Calibration vs. Bench Check),
Hold/Resume feature information and Figure
23, Conclusion of Go To Ground and Appendix
A.; Modifications to Figure 4, Figure 11, Table
6, Connector description, and EPR Test
information; Performance specifications
updated to include MOD “B” and NON-MOD
“B” performance accuracy and corresponding
Figures (previously listed as Table 4
Aeronautical Specifications).
K
260-01231
March 13, 2019
Minor reformatting, removal of compliance
requirement 91.171 (incorrect FAA regulation)
(see pg. 5), updated Appendix reference for 2.
System Config from Appendix G to E and 3.
Firmware Update from Appendix E to G (see
pg. 37).