56-101-01175 Revision P Page | 30
B.
Display Setup
– Configuring display format
The Display Setup allows the user to configure the display as a 2 or 4-parameter format
(refer to Figure 28 and Figure 29). While operating in Aeronautical mode for example, the
4-parameter format will allow ALT, ROC, CAS and MACH or ALT, ROC, CAS, and RtCAS
to be displayed. While in Control mode, Target values can be assigned to ALL 4
parameters by simply touching the screen on each of the 2 or 4-parameter displayed
areas.
Figure 28
Display Setup: 4-Parameter Format
Figure 29
Display Setup: 2-Parameter Format
C.
Units
– Displayed units
Once the Display Setup has been selected, (Aeronautical, Pressure units or EPR, 4-
parameter or 2-parameter display format) the Units menu choices allow the user to select
the units of measure for the given display parameters selected (refer to Figure 30 and
Figure 31).
For example, for Aeronautical mode, the available units for ALT are (1) ft or (2) m,
depending on the selection. The corresponding units are for ROC (1) ft/min or (2) m/min,
for CAS (1) kts or (2) km/h, and for RtCAS (1) kts/min or (2) km/h/min. Regarding MACH,
it is a dimensionless quantity that is always displayed as MACH.