Bardac PLX, Product Manual, Page: 192 / 235

1 9 2 C O NFIG URA TIO N
1 3.9.3 S O F T W ARE TERMIN ALS / A nded start PIN 3 0 7
3 0 7)A NDED S T ART i s norma ll y used by a
ser i a l li nk to contro l the dr i ve. The l oca l
hard w are term i na l i n the LO W pos i t i on
w ill defeat the ser i a l li nk.
The ser i a l li nk i n the O FF pos i t i on w ill
defeat the l oca l hard w are term i na l .
1 3.9.4 S O F T W ARE TERMIN ALS / Interna l run i nput PIN 3 0 8
The RUN command norma
ll y comes from the defau l t RUN term i na l (T 3 1) and w ill sho w the state of T 3 1.
Ho w ever th i s term i na l may be used as a programmab l e term i na l i n the event of a shortage of d i g i ta l i nputs. In
th i s case 3 0 8)IN TERN AL RUN IP must be d i sconnected from the RUN term i na l and set HIG H to a ll o w the
dr i ve to run.
From ST ART T 3 3
From A NDED
ST ART PIN 3 0 7
HIGH or LO W
To i nterna l
system
S O F T W ARE TERMIN ALS 3
3 0 7)A NDED S T ART 3 0 7)A NDED J O G
HIGH
PAR A ME TER RA N GE DEF A ULT PIN
A NDED ST ART HIG H or LO W HIGH 3 0 7
Sets a l og i c i nput to an i nterna l
A ND gate to contro l ST ART.
S O F T W ARE TERMIN ALS 3
3 0 8)IN TERN AL RUN IP 3 0 8)IN TERN AL RUN IP
LO W
PAR A ME TER RA N GE DEF A ULT PIN
IN TERN AL RUN IP HIG H or LO W LO W 3 0 8
Used to set RUN mode i f the
RUN term i na l i s reprogrammed.