Barco XHD-404, User Manual

Page: 34 / 287

1. The USB System Restore drive contains the user guide and the recovery
software. To restore the system using the USB System Restore drive,
see
Restore (p.40) .
2. Barco does not provide power cords for all locations. It may be neces-
sary to install a power-cord cap for your location. See
Replacing a power-
cord cap (p.223) .
Note
Although the Barco Media Server ships with only active DisplayPort-to-DVI
adapters, the video output card can handle two DisplayPort-to-DVI conver-
sions on its own; for these conversions you
may use passive DisplayPort-to-
DVI adapters. If you wish to connect to more than two DVI devices to the
video output card, you
must use active Display-Port-to-DVI adapters for the
any conversions beyond the first two. Connect passive adapters to ports 1
and 2, and connect active adapters to ports 3 and 4.
You may also use a passive DisplayPort-to-DVI adapter for the desktop display
(primary video card) conversion.
2.3 Rack-mount procedure
The Barco Media Server chassis is designed to be rack mounted. Please note the following
important points:
• The Barco Media Server is 4RU in height.
• The maximum ambient operating temperature is 40° C.
• Leave sufficient front and rear space to ensure that airflow through the
Barco Media Server is not restricted.
• Distribute the units evenly, when installing equipment in a rack, to
prevent hazardous conditions that may be created by uneven weight
distribution.
• Connect the Barco Media Server only to a properly rated supply circuit.
• Maintain reliable grounding (earthing) of rack-mounted equipment.
• Mount the Barco Media Server from the front rack ears, using four rack
screws (not supplied).
(Threads may be metric or otherwise, depending upon the rack type.)
!
Caution
At a minimum, an XHD-400 Series server chassis weighs 13.6 kg (30 lbs.). To
avoid injury, we recommend that two people rack mount the chassis.
31 Barco Pn: 60600320
Barco Media Server XHD-Series User Guide Section 2: Installation