Barco X Series Installation Manual Download

Page: 33 / 84

5. Setup process of the X-series display

5. SETUP PROCESS OF THE X-SERIES DISPLAY

About this chapter

This chapter roughly describes the installation process of the X-series display for a hanging or base stand con

guration.

Hanging X-series tiles

This con

guration is limited in height, maximum 16 tiles tiles high for a hanging con

guration.

Stacked X-series tiles

This con

guration is limited in height, maximum 10 tiles X2/X4 or 9 tiles X1.6/X1.9 tiles high for a base stand con

guration.

ARNING

Safety

rst. Fence off the installation area before starting to install your X-series display. Ensure

you read, understand and follow all safety instructions mentioned in the safety chapter, of this installation
manual. Furthermore, make sure that all installation requirements for your X-series display are ful

lled.

AUTION

Cover up the LED-wall on-site, to protect from dust and dirt, until the start of the event.

Latest software

For optimal performance of the X-series display all tiles should have the latest

ash software installed. Flash software packages

can be downloaded from the Barco secured website

https://my.barco.com

Overview

•

Set up a hanging X-series display

•

Set up a base stand X-series display

R5906024 X-SERIES 15/03/2016

Summary of Contents for X Series





















































































Search results

Summary of Contents for X Series

Reviews:

Related manuals for X Series

Brands by name

Popular brands

Barco X Series, Installation Manual

Search results

Summary of Contents for X Series

Reviews:

Related manuals for X Series

Brands by name

Popular brands