Barco X Series, Installation Manual

Page: 23 / 84

4. Components of the X-series display
4.3 X-series base stand setup accessories
Base stand setup accessories
To set up an X-series display in a base stand con fi guration additional mounting accessories are required as well as foot beams,
X-series truss/ fl oor beams and stackers. These accessories are easy to install with a minimum of tools. X-series tiles are built
upon the X-series truss/ fl oor beams. Foot beams provide an interface between the truss/ fl oor beams and the fl oor. Foot beams are
available in two sizes. Depending on the height of the X-series display longer foot beams must be used. The maximum height of a
base stand X-series display is 10 tiles X2/X4 or 9 tiles X1.6/X1.9 high. X-series truss/
fl oor beams are available in three sizes: the
dual, triple and quad truss/ fl oor beam. These truss/ fl oor beams cover a width of respectively two, three and four X-series tiles.
1
2
3
4
Image 4-8
1
X-series dual truss/ fl oor beam with connection pieces.
2 X-series triple truss/ fl oor beam with connection pieces.
3 X-series quad truss/ fl oor beam with connection pieces.
4 X-series connection pieces.
R5906024 X-SERIES 15/03/2016 19