4. Getting started
The area must be adequately ventilated and illuminated, in accordance with the relevant workplace health and safety regulations.
Make sure to leave enough space around the installation area so that interventions can be carried out under safe conditions.
The
fi
gure shows the minimum perimeter space for each foreseen con
fi
guration.
1000
50
1000
1000
1000
1000
1000
1000
1000
A
B
Image 4-1
A
Minimum perimeter space with units placed side by side.
B
Minimum perimeter space for units placed one on top of the other or for single units.
4.3
Unpacking
Packing description
Upon delivery, the chiller is packed into a wooden box inside a cardboard box. The wooden box is placed upon a wooden pallet
and secured with banding and fastening clips. Furthermore, to provide protection during transportation, the chiller is surrounded by
foam.
Once the chiller has arrived at the installation site, it needs to be removed from its carton box and pallet in a safe manner without
damaging the projector.
Components such as the DMD module,
fl
exible hoses, etc., are packed inside apposite cardboard boxes.
The following
fi
gure illustrates the most common package type, the maximum dimensions, warning symbols and information af
fi
xed
to the packages.
1
800
1200
1000
E
D
C
B
A
Image 4-2
14
R5905866 ULC-30A 31/01/2018
Summary of Contents for ULC-30A
