Barco ULC-30A, Installation And User Manual

Page: 23 / 52

5. Physical installation
5.2.3 Preparing the installation of the expansion module
Necessary tools
• Allen wrench 4 mm
• Electric screwdriver (to remove front and back cover)
How to prepare the Chiller for installation of the expansion module
1. Loosen the screws (A and C) to remove the front and back cover (B and D).
A
B
D
C
Image 5-3
2. Remove the three hex screws on the chiller frame.
Image 5-4
5.2.4 Removal of the fan unit
This procedure assumes the rear cover has been removed. For more info, see "Covers", page 12.
Necessary tools
Nut spanner 8 mm
How to remove the fan unit?
1. Unplug the cable connector.
R5905866 ULC-30A 31/01/2018 19