6. Starting up
6. STARTING UP
This chapter is intended for operators of the ULC-30A.
Overview
•
•
•
6.1
Controls and signal lights
Description
ULC-30A functions must be operated from the control unit, except for electrical starting, and are the responsibility of the owner.
A
B
Image 6-1
A) Main disconnect switch: it is used for connecting and disconnecting the power supply to the ULC-30A.
B) Indicator lamp (white light): indicates that the power supply to the ULC-30A is enabled.
6.2
Starting up
How to start up
1. Turn the main disconnect switch to the “I” position to activate the main power supply.
2. The indicator lamp (B) lights up.
3. To start up the machine, act on the control unit and follow the recommended procedure.
6.3
End of work stop
How to proceed
1. To stop the ULC-30A, act on the control unit and follow the recommended procedure.
2. Once the stopping procedure is completed, turn the main disconnect switch to the “OFF” position.
3. The indicator lamp (B) will switch off.
W
ARNING
:
Stopping in emergency conditions
To stop the appliance in the event of imminent danger (emergency stop), turn the main disconnect switch (A)
to the “OFF” position.
R5905866 ULC-30A 31/01/2018
31
Summary of Contents for ULC-30A
