5. Physical installation
Necessary parts
•
Secondary cooling unit expansion unit
•
Cable ties
How to mount the expansion module
1. Completely remove the packing material around the tubes of the expansion module.
2. Slide in the expansion module into the Chiller frame as illustrated.
Image 5-8
Installing expansion module
Note:
Make sure the rear support of the expansion module is sliding in the dedicated groove of the chiller frame.
3. Install the three screws on the front side of the expansion module (reference 1 image 5-9).
1
1
1
Image 5-9
Installing three screws
4. Install the two screws (reference 1 image 5-10) and washers (reference 2) on the backside of the expansion module.
R5905866 ULC-30A 31/01/2018
21
Summary of Contents for ULC-30A
